Buck Rogers Starfighter build update

Here’s the project I began this summer. This is the ’80s reboxing of Monogram’s Buck Rogers Starfighter model kit from ’79. For its age, the detail is pretty good! The only thing that sucks about it is the cockpit tub and a lack of a pilot figure. I’m going to light this kit.

I used Oyumaru plastic clay to make molds of the engine insert discs and I cast them in clear UV resin.

Here is a test by just holding a flashlight to the back end. Next I sprayed the inside of the engines with Modelkasten’s Shade Black light blocking paint.

I had a guy I know on the Macross modeling forum 3D print a decent cockpit tub. I used my rotary tool to dig a hole out for lighting.

This is just a clumsy mock-up, but I put a 3528 warm white SMD into the hole. I think when the time comes, I’ll cram some translucent white Oyumaru into the hole to create a light channel and diffuse the lights. As for the two side screens, I don’ t think this is gonna cut it. I’ll probably have to add some smaller SMDs to light those.

The module thingy on the front of the ship is not accurate. I cut it off and scraped it, then added a spare part from the old legacy Hasegawa F-15J model to represent how it’s supposed to look. Although looking at this up-close with a photograph, I see a lot of roughness that I cannot see with my 50 year old eyeballs. Looks like I will need to put my optivisors on and work on this some more.

Mini 3D-printed Minmay from Macross complete

My friend Gary sent me this small, 3D-printed Minmay figure a few years ago. I’ve slowly worked on it since then. The UN Spacy logo is from a set of Macross decals I bought on eBay years back, some of which I’d used on my 1:100 Imai Armored Valk I finished earlier this year. The pattern on her dress is from leftover decals from a Haku Rinpha resin kit from Hasegawa Eggplane Girls series.

She is VERY small, so zooming in with my camera like this is exposing the flaws I cannot see with my naked eyes. Her eyes turned out better than I thought they would. The sides where her torso joins her waist does not fit together like I’d hoped it would, but it fits very well in the back.

As for the Buck Rogers Starfighter visible in these pictures, my friend Blake had sent me this. He asked if I wanted one and I asked if he could print one in roughly a 1:144 scale version to make it essentially like a Bandai Mecha Collection-sized kit. I scanned the decals from the Monogram kit and shrunk them down to size to fit this small kit.